Name

SL201-D12RE

Processor

1 or 2 Intel^® Xeon^® Scalable Processor, up to 205W

Motherboard Model

G3DCL-B/G3DCL-TB

Chipset

Intel^®C621/C622 series server dedicated chipset

Memory

(System)

Supports DDR4 LRDIMM/RDIMM/NV-DIMM ECC memory

Memory frequency supports 2133/2400/2666/2933MHz

Single CPU supports 6*DDR4 channel, each channel supports 2 memory slots, Total 24*DDR4 memory slots in CPU0/CPU1. Single slot capacity is 8GB, 16GB, 32GB, 64GB, 128G

Expansion Card

1.(Left) PCI-Express 3.0 X24 slots are from CPU0；

2.(Middle) PCI-Express 3.0 X24 slots are from CPU0 / CPU1；

3.(Eight)PCI-Express 3.0 X16 slots are from CPU1.

Hard Disk

Max. support 12 front 3.5/2.5-inch SAS/SATA (HDD/SSD)

Rear support 4* 2.5 inch SAS/SATA (HDD/SSD), 4 rear 3.5/2.5-inch SAS/SATA (HDD/SSD) onboard 3*SFF-8643interfaces , 2* SATA DOM

M.2 SSD

2 M.2 PCIE X2 (2280)

LAN

Onboard 2 Gigabit RJ45 data net port

External Port

Front: VGA, 2 USB3.0

Rear: VGA, 2 USB3.0, 1 management net port, 2 RJ45 data net ports, 1 DB-9 COM

Management

Onboard iBMC management module, supports IPMI, SOL, KVM Over IP, Virtual media and more

System Fan

4* 8038 fan (optional 4* 8056 fan)

Power Supply

Standard configurated withPlatinum 550W, optional 800W, 1200W, 1600W hot-swap Redundant power supply (based on the actual power)

Dimensiom

2U rackmount, 748x433.4x87.6mm

S/N

Name

S/N

Name

1

3.5 inch Hard Disk

3

USB3.0 Port

2

VGA Port

Name

Type

Note

VGA Port

DB15

Used to connect display terminal, such as screen or KVM.

USB Port

USB 3.0

USB external interface is provided to access USB devices.

Note: When using the external USB device, please make sure that the USB device is in good condition, otherwise the server may work abnormally.

S/N

LED/Button

S/N

LED/Button

1

Power switch button/LED

5

System alarm LED

2

UID button/LED

6

Network port 1 connection status indicator

3

Reset button

7

Network port 2 connection status indicator

4

Hard disk LED

LED Status Description

Icon

LED/Button

Description

GOOXI Logo

Power LED

Power LED description:

Green (on): powered on.

Green (blinking): standby.

Green (off): power off.

Power button description:

Shortly press the button in the power-on status, and the OS will shut down normally.

Hold down the button for 6 seconds to power down the server.

When the power is on, press the button to start the machine.

UID LED/Button

UID LED/Button is used to locate the server to be operated. The indicator can be remotely turned off/on by manually pressing UID button or BMC command.

UID description:

Blue (on/blinking): the server is located.

Off: server is not located.

UID button description: press the button briefly to turn on/off the positioning light

Reset Button

Restart the server

Hard disk LED

Green (blinking): the hard disk is running normally

System Alarm

Including system alarm, fan alarm, power alarm, etc., and the details can be viewed through IPMI management software

LAN LED

Green (on): the network port connection is normal.

Off: the network port is not in use or breakdown.

Note: it corresponds to two 1GE network ports on the motherboard.

LAN LED

Green (on): the network port connection is normal.

Off: the network port is not in use or breakdown.

Note: it corresponds to two 1GE network ports on the motherboard.

S/N

Name

S/N

Name

1

Rise Module

7

USB 3.0 Port

2

HDD Module

8

OCP3.0 Port

3

Management Net Port

9

Power Module 1

4

VGA Port

10

Power Module1 AC Port

5

RJ45 Gigabit LAN

11

Power Module 2

6

COM

12

Power Module 2 AC Port

Name

Type

Number

Description

VGA Port

DB15

1

It is used to connect display terminal, such as screen or KVM.

Management Net Port

GE BASE-T

1

Provides 1000 Mbit/s LAN. Through this port, the server can be managed.

USB Port

USB 3.0

2

USB port is provided to access USB devices.

Caution：

When using the external USB device, please make sure that the USB device is in good condition, otherwise the server may work abnormally.

RJ45 Gigabit Port

GEBASE-T

2

Server network port.

Power Module AC Port

/

1 or 2

You can choose the number of power supply according to your actual needs, but make sure that the rated power of the power supply is greater than the rated power of the whole machine.

COM

1

Serial communication port

OCP3.0 Port

1

Installation of OCP3.0 network card

S/N

Name

S/N

Name

1

Connection status LED

4

Data transmission status LED

2

Data transmission status LED

5

Power module LED

3

Connection status LED

6

Power module LED

LED/Button

Description

Power module LED

Green (on): the input and output are normal.

Red (on): indicates that the input is normal, and there is no output due to power over temperature protection, power output over-current / short circuit, output over-voltage, short circuit protection, device failure (excluding all device failures), etc.

Green (1Hz / blinking): the input is normal, and the output is closed due to power on or in position; input overvoltage and undervoltage.

Green (4Hz / blinking): Firmware is in the process of online upgrading.

Off: no AC power input.

Connection status LED

Green (on): indicates Gigabit link.

Orange (on): 100 Megabytes Link.

Off: 10 trillion Link.

Data transmission status LED

Yellow (blinking): data is being transmitted.

Off: no data transmission.