【SL201-D08R】2U8 Bay 3.5 inch model

카테고리 찾아보기: Single Page(11); container house(0); 랙 서비스(12); solar power(2); photo booth.(22); 디지털 간판 키오스크(46); industrial touch Panel PC(47); 모든-에-하나의 PC/터치 패널 PC(140); 오픈 프레임 모니터(16); 터치 스크린 모니터(42); PC BA 디자인(3); medical science monitor display(6); AIO PC 프레임 캐비닛 액세서리(8)

고객 의견

저희에게 연락하십시오: 사무실: hk 슈 키오스크 co. 제한
301 # 방 타이 빌딩 4 산업 아 베이이 오
샹 지아 아오 탕, 반 톈, 롱 강,
심천, 광 동, 중국 (본토).
tel: 0086-0755-28367760
이동 전화: +86-18086519198
mail:[email protected]
기업에게 연락 해주기

Name	SL201-D08R
Processor	1 or 2 Intel^®Xeon^®Scalable Processor, up to 205W
MB Model	G3DCL-B/G3DCL-TB
Chipset	Intel^®C621/C622 series server dedicated chipset
Memory (System)	Supports DDR4 LRDIMM/RDIMM/NV-DIMM ECC memory Memory frequency supports 2133/2400/2666/2933MHz Single CPU supports 6DDR4 channel, each channel supports 2 memory slots, Total 24DDR4 memory slots in CPU0/CPU1. Single slot capacity is 8GB, 16GB, 32GB, 64GB, 128G
Expansion Card	1.(Left) PCI-Express 3.0 X24 slots are from CPU0； 2.(Middle) PCI-Express 3.0 X24 slots are from CPU0 / CPU1； 3.(Eight)PCI-Express 3.0 X16 slots are from CPU1.
Hard Disk	Max. 8 front 3.5/2.5-inch SAS/SATA (HDD/SSD) Max. 4 rear 2.5 inch SAS/SATA (HDD/SSD), 4 rear 3.5/2.5-inch SAS/SATA (HDD/SSD), onboard 3SFF-8643 interfaces , 2 SATA DOM
CD-ROM	1
M.2 SSD	2 M.2 PCIE X2 (2280)
LAN	Onboard 2 Gigabit RJ45 data net port (optional 2* 10Gigabit RJ45)
External Port	Front: VGA, 2* USB3.0 Rear: VGA, 2* USB3.0, 1 management net port, 2 RJ45 data net ports, 1 DB-9 COM
Management	Onboard iBMC management module, supports IPMI, SOL, KVM Over IP, Virtual media and more
System Fan	4* 8038 fan (optional 4* 8056 fan)
Power Supply	Standard configurated withPlatinum 550W, optional 800W, 1200W, 1600W hot-swap Redundant power supply (based on the actual power)
Dimensiom	2U rackmount, 748x433.4x87.6mm

Front panel components

2U8 Bay model

Figure 2- 5

Front panel port description

Name

Type

Note

VGA Port

DB15

Used to connect display terminal, such as screen or KVM.

USB Port

USB 3.0

USB external interface is provided to access USB devices.

Note: When using the external USB device, please make sure that the USB device is in good condition, otherwise the server may work abnormally.

Front panel LED and button

Figure 2- 8

S/N	LED/Button	S/N	LED/Button
1	Power switch button/LED	5	System alarm LED
2	UID button/LED	6	Network port 1 connection status indicator
3	Reset button	7	Network port 2 connection status indicator
4	Hard disk LED

Table 1- 12

LED Status Description
Icon	LED/Button	Description
		GOOXI Logo
	Power LED	Power LED description: Green (on): powered on. Green (blinking): standby. Green (off): power off. Power button description: Shortly press the button in the power-on status, and the OS will shut down normally. Hold down the button for 6 seconds to power down the server. When the power is on, press the button to start the machine.
	UID LED/Button	UID LED/Button is used to locate the server to be operated. The indicator can be remotely turned off/on by manually pressing UID button or BMC command. UID description: Blue (on/blinking): the server is located. Off: server is not located. UID button description: press the button briefly to turn on/off the positioning light
	Reset Button	Restart the server
	Hard disk LED	Green (blinking): the hard disk is running normally
	System Alarm	Including system alarm, fan alarm, power alarm, etc., and the details can be viewed through IPMI management software
	LAN LED	Green (on): the network port connection is normal. Off: the network port is not in use or breakdown. Note: it corresponds to two 1GE network ports on the motherboard.
	LAN LED	Green (on): the network port connection is normal. Off: the network port is not in use or breakdown. Note: it corresponds to two 1GE network ports on the motherboard.

Figure 2- 9

Table 1- 14

² Note：

Both 1 and 2 can be equipped with rear hard disk module or Riser module. The figure is for reference only, and the actual configuration as standard.

Rear panel port description

Name	Type	Number	Description
VGA Port	DB15	1	It is used to connect display terminal, such as screen or KVM.
Management Net Port	GE BASE-T	1	Provides 1000 Mbit/s LAN. Through this port, the server can be managed.
USB Port	USB 3.0	2	USB port is provided to access USB devices. Caution： When using the external USB device, please make sure that the USB device is in good condition, otherwise the server may work abnormally.
RJ45 Gigabit Port	GEBASE-T	2	Server network port.
Power Module AC Port	/	1 or 2	You can choose the number of power supply according to your actual needs, but make sure that the rated power of the power supply is greater than the rated power of the whole machine.
COM		1	Serial communication port
OCP3.0 Port		1	Installation of OCP3.0 network card

Table 1- 15

Rear panel LED and button

Figure 2- 10

S/N	Name	S/N	Name
1	Connection status LED	4	Data transmission status LED
2	Data transmission status LED	5	Power module LED
3	Connection status LED	6	Power module LED

Table 1- 16

LED/Button	Description
Power module LED	Green (on): the input and output are normal. Red (on): indicates that the input is normal, and there is no output due to power over temperature protection, power output over-current / short circuit, output over-voltage, short circuit protection, device failure (excluding all device failures), etc. Green (1Hz / blinking): the input is normal, and the output is closed due to power on or in position; input overvoltage and undervoltage. Green (4Hz / blinking): Firmware is in the process of online upgrading. Off: no AC power input.
Connection status LED	Green (on): indicates Gigabit link. Orange (on): 100 Megabytes Link. Off: 10 trillion Link.
Data transmission status LED	Yellow (blinking): data is being transmitted. Off: no data transmission.

Table 1- 17

꼬리표:

전자 Co.ltd Shenzhen kiosk

전화:+86-18086519198

담당자:드래곤 왕